Milli-Q® IQ 7000 specifications


Feed water requirements
Feed water quality Pretreated water using EDI, DI, RO or distillation technologies
Conductivity at 25 °C < 100 µS/cm
Total Organic Carbon (TOC) < 50 ppb
Pressure range * Max 6 bar
Temperature 5 – 35 °C / 41 – 95 °F
* For pressures between 0 and 0.1 bar, the system will operate, but product flow rate may be lower.

Ultrapure, Type 1 water specifications1 (from Q-POD® dispenser)
Resistivity at 25 °C2 18. 2 MΩ·cm
TOC3 ≤ 2 ppb (µg/L)
Particles4 No particles with size > 0.22 µm
Bacteria < 0.01 CFU/mL4,5
< 0.005 CFU/mL6
Pyrogens (endotoxins)5 < 0.001 EU/mL
RNases5 < 1 pg/mL
DNases5 < 5 pg/mL
Proteases5 < 0.15 µg/mL
Flow rate 0.05 – 2 L/min
These values are typical and may vary depending on the nature and concentration of contaminants in the feed water.
2 Resistivity can also be displayed non-temperature-compensated as required by USP.
In the appropriate operating conditions.
With Millipak® and Millipak® Gold
With Biopak®
With Millipak® Gold installed and used in a laminar flow hood

International regulation requirements

Declaration of CE and cUL Conformity:
The Milli-Q® IQ 7000 system has been tested by an independent and accredited company for compliance with CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. In addition, the Milli-Q® IQ 7000 system is built using components and practices recommended by UL and has been cUL marked. The registration can be verified on the UL web site: